This Guide will lead you through the process of unjamming a Global or Quantum Coin changer payout base.

You will recognise a payout jam when either tubes A & B or tubes C & D will not payout when the inventory buttons are pushed. You may also hear the payout motors squealing as they try to work against the jam.

Do not attempt to clear a jammed coin with screwdriver as this will cause further damaged to the payout base and further jams.

Limited Warranty

Coin Acceptors, Inc., hereby warrants all products of its manufacture to be free from defects in material and factory workmanship for a period of twenty-four (24) months from the date of manufacture, as detemined by the Coin Acceptors, Inc. manufacturing code*, subject to the following conditions:

Reconfiguring the acceptor for different coin payout.

The acceptor must be a programmable model acceptor this can be determined by the gate cable to the right of the coin return lever, if it is a grey 25mm wide cable then it a programmable model. Other models need to be returned to the service workshop to be reprogrammed.

The following procedure is used to reprogram the coin routing and payout of a programmable model coin mech: 

Attached is a JPG file (1Mb) of the Coinco brochure, as shown below.

This page will list the Global and Quantum Coin tubes. Global and Quantum coin tubes are interchangable.